Update RELEASE: Difference between revisions

From MediaWiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
This step is not typically required when you plan on continuing work in the same major release area. For example, if you just produced a ''2.13.0'' release and expect to continue supporting it and possibly having more ''2.13.0'' maintenance releases, you will likely ''not need'' to update the variables mentioned below.
This step is not typically required when you plan on continuing work in the same major release area. For example, if you just produced a ''18'' release and expect to continue supporting it and possibly having more ''18'' maintenance releases, you will likely ''not need'' to update the variables mentioned below.


You should inspect/change the value of the RELEASE, RELEASE_LAST, RELEASE_LAST_PREV and RELEASE_NEXT variables at the top of the include/data/configure.in script to their logical values.
If necessary, you should change the value of the RELEASE and/or RELEASE_LAST variables at the top of the include/data/configure.in script to their logical values.


The following assumes that you just created the ''2.11.0'' release and the last release published was ''1.8.1''.
The following assumes that you just published a ''18'' release and are now planning on moving to a Fedora 20 base.
 
; RELEASE_LAST_PREV
: This should be set to the version of the release prior to the one you just created. For example, if you just released ''2.11.0'' and the prior release was ''1.8.1'' then set RELEASE_LAST_PREV to ''1.8.1''.


; RELEASE_LAST
; RELEASE_LAST
: This should be set to the version just released (''2.11.0'' in this example).
: This should be set to the version just released (''18'' in this example).


; RELEASE
; RELEASE
: This should also be set to the version just released (''2.11.0'' in this example). This is new starting with ''2.11.0'' where we continue supporting the release via yum updates until the next release of Fedora.
: This should also be set to the version you will now be working on. Since, in this example, we are moving to a Fedora 20 base, it should be set to ''20''. Had we decided to continue using Fedora 18 as the base, it would be left at ''18''.
 
; RELEASE_NEXT
: This should be a guess at what the next release will be. It will be formed by NST's major ID (2), followed by the version of Fedora we expect to base it off of. For example, if the current release is ''2.11.0'' (based off of Fedora 11), a reasonable guess for RELEASE_NEXT would be ''2.12.0'' (assuming the next release will be based off of Fedora 12).

Latest revision as of 09:30, 13 April 2013

This step is not typically required when you plan on continuing work in the same major release area. For example, if you just produced a 18 release and expect to continue supporting it and possibly having more 18 maintenance releases, you will likely not need to update the variables mentioned below.

If necessary, you should change the value of the RELEASE and/or RELEASE_LAST variables at the top of the include/data/configure.in script to their logical values.

The following assumes that you just published a 18 release and are now planning on moving to a Fedora 20 base.

RELEASE_LAST
This should be set to the version just released (18 in this example).
RELEASE
This should also be set to the version you will now be working on. Since, in this example, we are moving to a Fedora 20 base, it should be set to 20. Had we decided to continue using Fedora 18 as the base, it would be left at 18.