Difference between revisions of "Network Setup Tips"
From NST Wiki
Jump to navigationJump to search (New page: == How To Add A Host Name Identifier To A DHCP Server == Some times it is desirable to add a host name identifier at the DHCP client to be recognized by the DHCP server. Then local host na...) |
(→How To Add A Host Name Identifier To A DHCP Server) |
||
| Line 1: | Line 1: | ||
== How To Add A Host Name Identifier To A DHCP Server == | == How To Add A Host Name Identifier To A DHCP Server == | ||
| − | Some times it is desirable to add a host name identifier at the DHCP | + | Some times it is desirable to add a ''host name identifier'' at the '''DHCP Client''' to be recognized by the '''DHCP Server'''. This will allow for local host names to be resolved by their respective name on the local '''LAN'''. This works well with a [http://www.dd-wrt.com DD-WRT] enabled [http://www.linksys.com LinkSys] router. |
| − | To do this add the following line to your network configuration file (we will use file: "'''/etc/sysconfig/network-scripts/ifcfg-eth0'''" | + | To do this, add the following line to your network configuration file (we will use file: "'''/etc/sysconfig/network-scripts/ifcfg-eth0'''" for this example): '''DHCP_HOSTNAME=<your desired host name for this NST DHCP client>''' |
<pre> | <pre> | ||
| + | [root@probe-biostar network-scripts]# cat ifcfg-eth0 | ||
DEVICE=eth0 | DEVICE=eth0 | ||
BOOTPROTO=dhcp | BOOTPROTO=dhcp | ||
Revision as of 12:38, 27 February 2007
How To Add A Host Name Identifier To A DHCP Server
Some times it is desirable to add a host name identifier at the DHCP Client to be recognized by the DHCP Server. This will allow for local host names to be resolved by their respective name on the local LAN. This works well with a DD-WRT enabled LinkSys router.
To do this, add the following line to your network configuration file (we will use file: "/etc/sysconfig/network-scripts/ifcfg-eth0" for this example): DHCP_HOSTNAME=<your desired host name for this NST DHCP client>
[root@probe-biostar network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes DHCP_HOSTNAME=probe-biostar
