Nessus: Difference between revisions
(Steps to download the necessary RPM) |
|||
| Line 24: | Line 24: | ||
=== Download RPM and Copy To NST === | === Download RPM and Copy To NST === | ||
Unfortunately, you will need to download and copy the appropriate '''RPM''' for '''Nessus''' to the: "''/tmp''" directory on your '''NST''' system by hand (this is due to the fact that you need to register at the '''Nessus''' site). Here are the steps which you will need to follow: | |||
* Go to the '''Nessus''' download area: "http://www.nessus.org/download/". | |||
* From the pull down list, select "''Nessus 3.0.5 for Linux''" and press the "''Download''" button. | |||
* Complete the registration process (use a working email address when you register as you will need the registration code later). | |||
* Download the file: "''Nessus-3.0.5-fc5.i386.rpm''". | |||
* Transfer the downloaded file to the: "''/tmp''" directory on your '''NST''' system. | |||
After completing this step, you should see results similar to those shown below on your '''NST''' system: | |||
<div class="screen"> | |||
<div class="screenTitle">After Downloading RPM</div> | |||
<div class="userInput"><span class="prompt">[root@probe ~]# </span>ls -l /tmp/Nessus*</div> | |||
<pre class="computerOutput"> | |||
-rw-r--r-- 1 root root 8053747 Jun 14 08:39 /tmp/Nessus-3.0.5-fc5.i386.rpm | |||
</pre> | |||
<div class="userInput"><span class="prompt">[root@probe ~]# </span></div> | |||
</div> | |||
=== Update Your NST WUI === | === Update Your NST WUI === | ||
Revision as of 09:39, 14 June 2007
Upgrading To Nessus v3.0.5
The Nessus license does not permit v3.0.5 to be included in the NST distribution. The following provides the steps necessary to upgrade a NST system to Nessus v3.0.5.
Requirements
- Registration at the Nessus site.
- A hard disk installation of NST v1.5.0 (a virtual hard disk installation will work - but is not optimal).
Caveats
- The "html_graph" option is no longer available as an output method (performing Nessus scans using the NST WUI will still be possible, but a little awkward).
- The upgrade disables the X GUI Nessus client. You will need to download a separate Nessus client package if you need this feature.
Instructions
Register At the Nessus Site
In order to install Nessus v3.0.5, you will need to register at the Nessus web site. Once registered, you will be able to download the necessary RPM and you will receive a activation code via email which will be used to activate your installation.
Download RPM and Copy To NST
Unfortunately, you will need to download and copy the appropriate RPM for Nessus to the: "/tmp" directory on your NST system by hand (this is due to the fact that you need to register at the Nessus site). Here are the steps which you will need to follow:
- Go to the Nessus download area: "http://www.nessus.org/download/".
- From the pull down list, select "Nessus 3.0.5 for Linux" and press the "Download" button.
- Complete the registration process (use a working email address when you register as you will need the registration code later).
- Download the file: "Nessus-3.0.5-fc5.i386.rpm".
- Transfer the downloaded file to the: "/tmp" directory on your NST system.
After completing this step, you should see results similar to those shown below on your NST system:
-rw-r--r-- 1 root root 8053747 Jun 14 08:39 /tmp/Nessus-3.0.5-fc5.i386.rpm
