Console Output and Serial Terminals: Difference between revisions
From MediaWiki
Jump to navigationJump to search
| Line 1: | Line 1: | ||
== Serial Console On NST 2. | == Serial Console On NST 2.13.0 == | ||
Use the following command to manually enable the serial console on NST versions 2.x.x or above. This example will set the serial baud rate to: "'''57600'''" and use serial device: "'''/dev/ttyS0'''". | Use the following command to manually enable the serial console on NST versions 2.x.x or above. This example will set the serial baud rate to: "'''57600'''" and use serial device: "'''/dev/ttyS0'''". | ||
Revision as of 16:04, 17 May 2011
Serial Console On NST 2.13.0
Use the following command to manually enable the serial console on NST versions 2.x.x or above. This example will set the serial baud rate to: "57600" and use serial device: "/dev/ttyS0".
[root@probe ~]# initctl emit --no-wait fedora.serial-console-available ttyS0 57600
[root@probe ~]#
