HowTo Geolocate ntop Data

Overview

This HowTo explains the procedure for setting up an ntop session and producing on demand host geolocations rendered on either a Mercator World Map projection or on a KML Earth Browser such as Google Earth, Google Maps or Marble.

One of the goals of the NST WUI is to provide a web-based front-end to numerous open source network security applications. Trying to build out a web-based interface that has a common look-and-feel across the vast spectrum of applications is a daunting task. Once an NST WUI interface is mastered, it will become a routine task for the network security administrator to use it across different NST systems and network infrastructure environments.

Before diving into producing ntop Hosts Geolocations, one needs to understand best practices on how to setup an ntop session as a Host data source collector. This first involves getting ntop up and running using its NST WUI management interface and then secondly controlling how much data ntop is configured to collect using ntop administrative settings.

Note: The NST WUI only supports setting up and managing one instance of an ntop session.

ntop Setup Management

This section describes how to setup an ntop session using the NST WUI. The screen shot below shows one how to locate the ntop Management page using the NST menu bar.

NST WUI ntop Management Menu Selection

Network Interface(s)

The input and selection fields provided by the NST WUI management interface will be explained so that one can quickly start up ntop. One or more network interfaces can be selected (i.e., click on an associated check box) to be monitored by the ntop application. One can click on a NIC adapter icon to examine detailed counter data and interface controls associated with a network adapter. This feature can be particularly useful if one wants to know if traffic is currently occurring on a network interface prior to bring up the ntop session. For best results when geolocating Hosts using ntop data, select a network interface to monitor that has a public IP Address presence (e.g., Network Tap or SPAN port associated with the dirty side of a corporate firewall or a web server farm located in a DMZ).

A network interface does not have to have a binding IP Address (i.e., stealth interface) and can also be in the Down state. The NST WUI will bring all selected network interfaces from the Down state to the Up state prior to starting the ntop session.

Note: When starting ntop as a service at boot time, all configured ntop network interfaces must be in the Up state at a minimal. See section: Configuring A Stealth Network Interface with NST for more information.

HTTP / HTTPS Access

Access to the ntop user interface can be configured to use either the HTTP and/or the HTTPS protocol. This is done by setting a non-zero Access Port value for the associated protocol. An access port value of Zero (0) will disable the use of the protocol. Typically, an access port value of 3000 is used for HTTP and an access port value of 3001 is used for HTTPS.

Note: Access to the ntop user interface for the configuration shown in the screen shot below would be: https://10.222.222.124:3001

Setup ntop Options

The script: "setup_ntop" is used to support the NST WUI by creating a runtime execution environment for ntop and starting up the ntop daemon. The Setup ntop Options field allows one to add setup and runtime options associated with the script: "setup_ntop". Normally, other than specifying the runtime directory: "--rdir /var/nst", this field does not need to be altered. For detailed additional options, expand the Setup ntop Options section on the NST WUI page.

NST WUI ntop Setup Management

ntop Options

The ntop Options field is used to specific additional ntop parameters that are not provided automatically by the NST WUI ntop Setup Management interface. Example - Add an option so that Idle hosts are not purged from memory and set the Refresh time in seconds to 1 min: "--sticky-hosts --refresh-time 60". For detailed additional ntop options, expand the ntop Command Line Options section on this NST WUI page.

ntop Runtime Management

Once an ntop session is up and running, one can now produce on demand host geolocations.

NST WUI ntop Runtime Management