NST v2.x Guidelines: Difference between revisions

From MediaWiki
Jump to navigationJump to search
No edit summary
Line 257: Line 257:


NOTE: This may work for other USB devices (like a USB hard disk), but has not been tested.
NOTE: This may work for other USB devices (like a USB hard disk), but has not been tested.
= Yum Tips =
== Yum Reference Documentation ==
* [http://blog.kagesenshi.org/2008/04/12-yum-tips-and-tricks.html 12 YUM Tips and Tricks] - Yum Info


= RPM Build Tips =
= RPM Build Tips =

Revision as of 10:50, 20 June 2009

Overview

While looking at the effort involved in moving NST to Fedora 10, we decided that we wanted to spend less time and effort on package maintenance and focus more on WUI development. To accomplish this, we will migrate away from our custom ISO script building techniques (that we started back in 2003) and move to the livecd-creator mechanism that has become a part of the standard Fedora distribution.

Good Things

  • Users will have access to yum package manager and the ability to enhance (or trash) their NST systems to their hearts content.
  • Using livecd-creator will keep us Fedora compatible.
  • Hard drive installation will be through standard Fedora tool.
  • Migration to the next release of Fedora should be much less painful.
  • Much less effort required on our parts for installing the numerous Fedora packages we depend on.
  • Potential for creating our own yum repository (allowing one to update their NST system using a standard yum update invocation).

Bad Things

  • ISO will not fit on CD (will require DVD).
  • Build times may be slower and it may be difficult to test individual package installations without doing a full build.

General Build Guidelines

The building of the NST ISO image will then involve the following steps:

  • The building of a local yum repository for packages which we want to continue building ourselves (or are not found in the Fedora repositories). This will be located under the top level yum directory.
  • The building of the ISO using the standard livecd-creator package. This will involve many custom scripts for "tweaking" the default ISO image created. This will be located under the top level livecd directory.

Local Yum Repository

Initial Build

To build the NST Yum repository on a development machine (from scratch):

  • Checkout the NST source tree.
  • Run the top level ./configure script.
  • Change to the yum directory.
  • Run the ./configure script.
  • Run: make help | less to review what you can build.
  • Run: yum install $(make build-requires) to make sure your development system has the necessary packages for building the yum repository.
  • Run make all to build the repository (the files will appear under the repo sub directory).

The command sequence looks something like the following:

 nstcvs co -d nst .
 cd nst
 ./configure
 cd yum
 ./configure
 make all

NOTE: If the configure stage determines that your system is missing some packages, it should report what packages you need to install.

Subsequent Builds

After the initial build, you can use the following to update:

 ./configure
 make all

IMPORTANT: The make dependencies will only rebuild if the associated pkginfo.xml file is modified. This means if you modify source code for the NST WUI, a make all under the yum area will NOT detect the change and may not rebuild the package. To force the building of a package, include NAME-remove on the command line. For example, to force the building of the nstwui and nst-icons packages, use the following:

 make nstwui-remove nst-icons-remove all

Rebuilding Repository

If you want to rebuild your entire repository, remove the repo sub directory and then build:

 rm -fr repo
 make all

Rebuilding Everything

If you want to re-download all of the source and rebuild your entire repository:

 make nuke
 make all

Single Build

Once the yum area is configured, you can force the building of a single package. For example, if you want to force the build of the nst-config package, run:

make nst-config-remove nst-config

Test Build

If you have a running instance of a NST system, you can force the building of a package and install it on the remote NST system. For example, to force the building of the nst-config and do a test installation on the NST at 192.168.100.10, run:


make HOST=192.168.100.10 nst-config-remove nst-config-probe-install

ISO

Normal Build

You need to be in the livecd sub-directory in order to build the ISO image.

cd livecd

Make sure you build your yum repository first (if you haven't done so yet):

make -C ../yum all

To build the ISO image:

./configure
make iso

For more possibilities use the help target:

make help | less

Clean Build

For a clean build:

make clean
./configure
make iso

Live USB Build

You can use the "liveusb USBDEV=USB_DEV" target to install the NST ISO image onto a USB flash drive (these drives are also known as: memory sticks and thumb drives). This will take a considerable amount of space on your thumb drive (you should have at least 1.5 GB of free space).

Before attempting this, you should review the How to create and use Live USB page at the Fedora Wiki. This page offers some useful troubleshooting tips as well.

The following demonstrates the make invocation to install the NST onto a USB flash drive. In this example invocation, I plugged in my flash drive and determined (through fdisk -l) that my flash drive partition was /dev/sdb1. Do not assume that your system will have the same device mapping if you specify a disk partition other than your USB flash drive, YOU WILL LIKELY DESTROY THE DATA ON THAT PARTITION!

make liveusb USBDEV=/dev/sdb1

NOTE: This command can only be used after the NST ISO image has already been created.

NOTE: The flash drive should not be mounted (or at least it does not need to be mounted) when invoking this make target.

You may specify a persistent overlay value using: OVERLAY=SIZE_IN_MB. This persistent overlay is used between reboots to persist changes you may make to your system. If omitted, this value defaults to 512. You can specify a value up to 2048. The following example demonstrates a invocation setting up a 1024 MB overlay:

make liveusb USBDEV=/dev/sdb1 OVERLAY=1024

liveusb-creator Notes

If you have booted the NST system from a "live" DVD image, you can use the Live USB Creator interface from the fluxbox menu system to install the "live" version of NST directly onto a USB memory stick. To do so:

  • Bring up the fluxbox desktop (either on native X over via VNC).
  • Right click on the desktop to pull up the menu.
  • Select System Utilities|Create Live USB Disk.

Disk Preparation

The "How to create and use Live USB" page has a lot of useful information on preparing and testing USB memory sticks. Here are a couple of items we've noticed:

  • If you use a FAT 16 filesystem, the maximum overlay image size will be limited to 2048MB
  • If you have a large USB memory stick (8GB for example), you may be better off using FAT 32.
  • You can format a filesystem as FAT 32 via:
mkdosfs -F 32 -n usbdrive /dev/sdb1
  • If you use gparted to setup your partitions, make sure that the boot flag is set on the partition you install to (otherwise Live USB Creator will complain about the partition).
  • We have seen Live USB Creator fail to update the MBR on the USB device. Refer to: "How to create and use Live USB" for trouble shooting this situation.

ISO Selection

It is not obvious how to use the graphical interface of Live USB Creator to install from the booted ISO image. To tell Live USB Creator to use the ISO image which is currently booted, you need to:

  • Press the Browse button inside the Use existing Live CD group.
  • Ignore the normal browse controls! Instead, type in the device assigned to your CD/DVD drive (it should be something similar to: /dev/sr0).
  • Press the Enter key after typing the device name.
  • A message should appear in the log window. Something along the lines of:
sr0 selected
  • The Create Live USB button should activate (if a target device is selected).
  • Verify (or change) the Target Device
  • Specify the amount of Persistent Storage you'd like to allocate.
  • Press the Create Live USB button to begin the installation.

Live USB Boot

Menu Boot Choices

You can not use the Local boot method when booting from a live USB device. Feel free to delete this choice from your syslinux.cfg file.

Detecting Persistent Overlay

During a live boot, a overlay image is used. This overlay may be created in RAM, or it may be persistent in which case changes will be preserved across boots.

The current method for testing for the presence of a persistent overlay is to look for the presence of the string: "overlay=" on the command line (/proc/cmdline).

Reset Persistent Overlay

A persistent overlay will eventually become full. When this happens, the root file system becomes a read-only file system and things go downhill rapidly. The solution to this problem is:

  • Reboot the system.
  • Select a boot option (like: Console) from the boot choices menu.
  • Edit the boot option and append the kernel parameter reset_overlay to the end of the line.
  • Boot the system.

This should reset your persistent overlay to its original state allowing you to start over.

USB Installation

The NST distribution can be installed onto and run directly from a memory stick. There are two ways in which one can perform the installation.

  • As a NST Live installation.
  • As a full NST hard disk installation.

Each method has its advantages and disadvantages.

Dual Boot NST Hard Disk Install/NST Live from USB

It is possible to dual boot off of a USB memory stick. This allows one to put both the NST Live version and the NST hard disk installation on the same memory stick. This will require a memory stick of 8GB or more.

The following steps are required:

  • Setup up a 2GB partition as primary partition 1 on the system according to the requirements of the liveusb-creator utility.
  • Install the NST Live version onto the 2GB partition using the "System Utilities|Create NST Live USB Disk" command from the fluxbox menu.
  • Verify that the NST Live version installed boots.
  • After booting NST Live, perform a full hard disk installation to the remaining portion of the memory stick use the "System Utilities|Install NST Live To Disk" command from the fluxbox menu.
  • Reboot the system, it should boot up using the hard disk installation on your USB memory stick (you should see the grub boot loader).
  • After logging in, add the following to your: /boot/grub.conf file:
title NST Live (for install)
      root (hd0,0)
      chainloader +1
  • From this point on, when you boot off of your USB memory stick, you should see the grub boot loader come up and you should have the option to select "NST Live (for install)" from the grub boot screen.


NOTE: This may work for other USB devices (like a USB hard disk), but has not been tested.

Yum Tips

Yum Reference Documentation


RPM Build Tips

RPM Reference Documentation

Tips on RPM "%macros"

To find the secret "%macros", try commands like:

rpmbuild --showrc | grep _ln
rpmbuild --showrc | grep share

To find RPM query format macros:

rpm --querytags | less

HowTo: Show Spec File Scripts Within An RPM Package

Example: Show all scripts within the RPM package: "php-pear-Mail"

rpm -q php-pear-Mail --scripts | less

Example: To show post (%post) install scripts for RPM package: "nstwui"

rpm -q nstwui --queryformat "%{POSTIN}" | less

The Available RPM "Groups"

The Group: line in a spec file should be set to one of the group names allowed by Fedora. Refer to the file: "/usr/share/doc/rpm-4.6.0/GROUPS" on your development system to see what group names are available.

Downloading/Installing Source For A Fedora Package

You can use the yumdownloader and rpm commands to download (and install) the source code for most packages which can be yum installed. For example, the following demonstrates how to get the source code for the vnc-server package:

yumdownloader --source vnc-server
rpm -ivh vnc-4.1.3-1.fc10.src.rpm
ls ~/rpmbuild/SPECS ~/rpmbuild/SOURCES