Difference between revisions of "X Server"

From NST Wiki
Jump to navigationJump to search
(Set Remote X Server Display)
Line 8: Line 8:
 
PROBE_IP_ADDR="172.31.1.190";
 
PROBE_IP_ADDR="172.31.1.190";
 
REMOTE_IP_ADDR="172.31.1.150";
 
REMOTE_IP_ADDR="172.31.1.150";
 +
DISPLAY=":8.0";
 
#
 
#
 
/usr/bin/xhost +"${PROBE_IP_ADDR}";
 
/usr/bin/xhost +"${PROBE_IP_ADDR}";
Line 13: Line 14:
 
/usr/bin/firefox https://${PROBE_IP_ADDR}?xdisp=${REMOTE_IP_ADDR}${DISPLAY}
 
/usr/bin/firefox https://${PROBE_IP_ADDR}?xdisp=${REMOTE_IP_ADDR}${DISPLAY}
 
</pre>
 
</pre>
 +
 +
One needs to run the "'''xhost'''" command to allowed the "'''NST Probe'''" to make connections to the "'''Remote X Server'''". One can see that the "'''xdisp'''" variable needs to be set to the "'''Remote X Server'''" and "'''Display'''" setting.

Revision as of 10:49, 25 October 2007

Set Remote X Server Display

This section shows one how to set the "X Display" to a Remote X Server prior to starting up your web browser (i.e. firefox) for running an X Application launched by the "NST WUI". Case 1: Connect to a probe's "NST WUI" and run an X Application on a specific X Server. The script below is an example on how to do this.

#! /bin/bash
#
PROBE_IP_ADDR="172.31.1.190";
REMOTE_IP_ADDR="172.31.1.150";
DISPLAY=":8.0";
#
/usr/bin/xhost +"${PROBE_IP_ADDR}";
#
/usr/bin/firefox https://${PROBE_IP_ADDR}?xdisp=${REMOTE_IP_ADDR}${DISPLAY}

One needs to run the "xhost" command to allowed the "NST Probe" to make connections to the "Remote X Server". One can see that the "xdisp" variable needs to be set to the "Remote X Server" and "Display" setting.