Tunnelling UDP Traffic Through An SSH Connection

From NST Wiki
Revision as of 12:33, 22 March 2007 by Rwh (talk | contribs) (Tunnel A TCP Forward Port Through SSH)
Jump to navigationJump to search

Overview

This section describes how to use NST to tunnel a UDP traffic conversation through a SSH connection. For our example we will tunnel IPMItool traffic (UDP Port: 623) through an SSH connection to a Sun Fire X4200 server's Integrated Lights Out Manager (ILOM) service processor network interface. Three systems are involved, 2 NST probes and the x4200 server. Reference information was taken from: "Performing UDP tunneling through an SSH connection".

Step By Step:

Tunnel A TCP Forward Port Through SSH

First we need to establish the tunnel for a "non-used" TCP port from the local NST probe to the remote NST probe which shares the same LAN as the destination x4200 server.

Establish An SSH Connection With TCP Port Forwarding
[root@probe tmp]# ssh -p 31222 -L 9999:localhost:9999 root@55.44.22.178;
root@55.44.22.178's password:
Last login: Thu Mar 22 11:18:59 2007 from cpe-72-222-76-188.nycaper.res.rdr.com

===============================================
= Linux Network Security Toolkit (NST v1.5.0) =
===============================================

[root@probe-biostar ~]#

In this example SSH traffic is being NATed through a firewall. The SSH listening port at the dirty side of the firewall is: "31222". We have chosen to use TCP port forwarding for the "non-used" TCP port: "9999". The remote NST probe's IP Address is: "55.44.22.178".