Difference between revisions of "NST 20 Hard Disk Installation"

From NST Wiki
Jump to navigationJump to search
(Starting Hard Disk Installation)
(Starting Hard Disk Installation)
Line 1: Line 1:
 
= Starting Hard Disk Installation =
 
= Starting Hard Disk Installation =
  
There are several ways to install the Network Security Toolkit (NST) distribution to the hard disk from a ''live boot''.
+
[[File:Thunderbolt.png|frame|left|'''[[Feature Release Symbol | <center>NST 20</center>]]''']]  There are several ways to install the Network Security Toolkit (NST) distribution to the hard disk from a ''live boot''. This page provides the basic information to get you started with the installation of release 20 of the NST.
  
 
== From the Boot Screen ==
 
== From the Boot Screen ==

Revision as of 18:32, 3 February 2014

Starting Hard Disk Installation

There are several ways to install the Network Security Toolkit (NST) distribution to the hard disk from a live boot. This page provides the basic information to get you started with the installation of release 20 of the NST.

From the Boot Screen

One of the simplest mechanisms is to simply boot from your NST live media (DVD, USB, or ISO image) and select the Hard Disk Install option from the boot screen.

NST 20 Boot Screen with Hard Disk Install option

After selecting the Hard Disk Install option from the boot screen, it will take a few moments for the installation program to come up. Eventually the installation program will start and you will see the screen shown in the #Hard Disk Installation section on this page.

From the Graphical Desktop

Another option is to boot in Graphical Desktop mode and then double click on the Install NST To Hard Drive icon as seen in the image below.

NST 20 Install NST To Hard Drive Icon

It will take a few moments for the installation program to come up. Eventually the installation program will start and you will see the screen shown in the #Hard Disk Installation section on this page.

From the Command Line

Finally, you can start the graphical installer by running the nstliveinst script from the command line. You can run this command without any command line options as shown below:

nstliveinst

It will take a few moments for the installation program to come up. Eventually the installation program will start and you will see the screen shown in the #Hard Disk Installation section on this page.

The nstliveinst program has many options and modes of installation. You are strongly encouraged to read the nstliveinst man page for all of the features (in particular when you can't run the standard GUI installer).

Hard Disk Installation

Main Screen

NST 20 Hard Disk Install Screen

Set Keyboard

NST 20 Hard Disk Install Select Keyboard

Select Disk(s)

NST 20 Hard Disk Select Disks

Format Disk(s)

NST 20 Hard Disk Install Disk Options
NST 20 Hard Disk Install Partition Disks

Begin Installation

After setting all of the required options, you should see a Begin Installation button appear at the bottom right of the screen. Press this button to begin the installation.

NST 20 Begin Hard Disk Install

Once you begin the installation, you will see a progress bar indicating the the hard disk installation is underway. We have noticed that this progress bar is not very smooth, it tends to jump to about the half way point rather quickly and then stay there for a long period of time - eventually it should complete.

NST 20 Hard Disk Install Progress

Completing the Installation

Eventually the hard disk installation will complete and you will see the following.

NST 20 Hard Disk Install Done

Press the Quit button to exit the installer. Unfortunately, if you launched the graphical installer from the command line or from a direct boot, it may not cleanly terminate. If you find yourself looking at a black screen, you can turn the power off to the system (this seems to work OK). Alternatively, if you would prefer to shut down the system cleanly, press the Control+Alt+F2 key combination to switch to a console login screen.

NST 20 Hard Disk Install Screen

Log in as the root user and then shutdown the system (shown below using the poweroff command).

NST 20 Hard Disk Install Screen

Booting After Hard Disk Install

Remove your live boot media and boot your system. If things worked correctly, you should see an initial boot screen similar to what is shown below:

NST 20 Boot Screen After Hard Disk Install