HowTo Run A Script At Boot

From NST Wiki
Revision as of 07:56, 15 October 2012 by Paul Blankenbaker (talk | contribs)
Jump to navigationJump to search

When customizing a NST system, it is often desirable to run a script at boot time to perform some specific actions.

In the past, you could simply edit the /etc/rc.d/rc.local configuration file to run system specific commands. After Fedora moved to using systemd to manage system services, the /etc/rc.d/rc.local file is no longer present. However, the /etc/rc.d/rc.local script is still honored by systemd via the rc-local.service target.

You can verify that the rc-local.service is enabled at boot time using the following command:

[root@taco-dev32 nstboot]# systemctl is-enabled rc-local.service && echo yes
static
yes
[root@taco-dev32 nstboot]# 

At the time of this writing, the rc-local.service target looked something like the following:

[Unit]
Description=/etc/rc.d/rc.local Compatibility
After=network.target

[Service]
Type=forking
ExecStart=/etc/rc.d/rc.local start
TimeoutSec=0
RemainAfterExit=yes
SysVStartPriority=99

To run commands at boot time using the rc-local.service script you need to do the following:

  • Create the file: /etc/rc.d/rc.local.
  • Optionally check for the "start" argument (which is passed via the ExecStart parameter shown above).
  • Put the commands you want to run inside the file.
  • Make it executable.

Here is a example which starts up a VNC server for the pkb user account automatically at boot time:

#!/bin/bash
/bin/su - pkb -c 'nstvncadmin --mode setup -d 6 --desktopmgr fluxbox';