Difference between revisions of "HowTo Shutdown NST Using A USB Flash Drive Install For Relocation"

From NST Wiki
Jump to navigationJump to search
(Preparing NST For Relocation Using: "/sbin/halt.local")
(Preparing NST For Relocation Using: "/sbin/halt.local")
Line 3: Line 3:
 
If you are using a "'''USB Flash Drive'''" hard disk installation, the following file: "'''/sbin/halt.local'''" found in the depiction below can be created so that the "'''USB Flash Drive'''" can be relocated to any other system that supports booting from a "'''USB Flash Drive'''".
 
If you are using a "'''USB Flash Drive'''" hard disk installation, the following file: "'''/sbin/halt.local'''" found in the depiction below can be created so that the "'''USB Flash Drive'''" can be relocated to any other system that supports booting from a "'''USB Flash Drive'''".
  
* Note: The file: "'''/sbin/halt.local'''" if found will be used by the script: "'''/etc/init.d/halt'''" during the '''shutdown''' of an '''NST''' system.  
+
* Note: The file: "'''/sbin/halt.local'''" if found will be used by the script: "'''/etc/init.d/halt'''" during the '''shutdown''' process of an '''NST''' system.  
  
 
<pre class="programListing">
 
<pre class="programListing">

Revision as of 17:29, 25 October 2009

Preparing NST For Relocation Using: "/sbin/halt.local"

If you are using a "USB Flash Drive" hard disk installation, the following file: "/sbin/halt.local" found in the depiction below can be created so that the "USB Flash Drive" can be relocated to any other system that supports booting from a "USB Flash Drive".

  • Note: The file: "/sbin/halt.local" if found will be used by the script: "/etc/init.d/halt" during the shutdown process of an NST system.
#! /bin/bash

# Source function library...
. "/etc/init.d/functions";

echo -n "Preparing NST for relocation:";

#
# Prepare for move on each shutdown...
/usr/bin/nstboot --move;

if [ ${?} -eq 0 ]; then
  echo_success;         # signal success...
  echo;
  exit 0;
else
  echo_failure;         # signal failure...
  echo;
  exit 1;
fi