HowTo Configure and Run a Ring Buffer Capture Session Using: "nstringbufcap"
Contents
Overview
A new NST script: "nstringbufcap" has been developed with NST 24 for managing one or more network packet capture sessions that utilize a ring buffer storage mechanism. This capability allows one to capture network traffic pre and post some controlled event. Currently, an NST Network Interface Bandwidth Monitor 2 Threshold Pause State Notification Execs template: "/etc/nst/notifications/bwmon/tp_state_nstringbufcap_snapwuimerge.template" is provided for snapping a capture when a Pause event occurs and then the NST WUI Single-Tap Network Packet Capture page can be used for capture decode and analysis.
The nstringbufcap script has a specific mode used for installing and configuring a ring buffer capture session. Once install, a capture session can be started under the control of a systemd service.
