HowTo Geolocate Active Connection Information

Quick Start

• Set up your NST system such that it can geolocate IP addresses (see: HowTo Setup The NST System To Geolocate Data).
• From the NST WUI menu bar select the Network menu, then Monitors and finally Active Connections.
• Explore the controls and information displayed and try out Map mode (Hint: there are tool tips everywhere).

Screencasts

The Active Connection Introduction screencast provides a introduction and overview to the Active Connection page.

EmbedVideo was given an illegal value for the alignment parameter "360". Valid values are "left", "center", or "right".